Industry news

How to install the slewing bearing

2022-04-12

Slewing Ring Bearing is a large bearing with special structure that can bear large axial load, radial load and overturning moment and other comprehensive loads at the same time, and integrates various functions such as support, rotation, transmission and fixation. Since the diameter of Slewing Ring Bearing is usually 0.4-10 meters, it will be difficult to install. So, how should Slewing Ring Bearing be installed? Now Yantai Zhiyuan Machinery Co., Ltd. will explain it to you.

 

How to install the slewing bearing

 

How should Slewing Ring Bearing be installed?

 

1. Before installing Slewing Ring Bearing, the first thing to check is some installation conditions of the host, to see if the host can carry heavier objects. Then it is necessary to check whether the installation surface is smooth and flat, and there are no debris.

 

2. Adjust the position of the soft belt area when installing the Slewing Ring Bearing to ensure that the soft belt area is not in a heavy load position.

 

3. The specific direction of the Slewing Ring Bearing needs to be fixed when installing the Slewing Ring Bearing, and some screws must be tightened and checked. There should be enough pre-tightening force when tightening the bolt, and the pre-tightening force should be 70% of the yield limit of the bolt material. . . After installation, check whether the bearing turntable can rotate freely.

 

4. In addition, when installing Slewing Ring Bearing, only flat washers can be used and spring washers are strictly prohibited.

 

How to install the slewing bearing

 

The above is "how to install the Slewing Ring Bearing" for you. Only when the Slewing Ring Bearing is properly installed can the machinery and equipment operate normally. Yantai Zhiyuan is a professional manufacturer of large mechanical parts such as Slewing Ring Bearing and Slewing bearing. The products are exported to dozens of countries and regions abroad. Welcome to contact us for more information about Slewing Ring Bearing.